4/27/2023 0 Comments Marine power converterLearn More About the Standard Series DC-DC Converters (See Isolated Series, for positive ground applications.) Ideal for powering voice, data and navigation electronics in marine applications. * NOTE: Gel-Cell and AGM batteries do not require an Equalize Mode.Convert 20-50 VDC input to 12 or 24 VDC negative ground output for powering communication/navigation equipment, on negative ground systems. ![]() This remixes the electrolyte mixture of water and sulfuric acid. When in the Storage Mode, the microprocessor automatically equalizes the battery by increasing the voltage from 13.2 Volts to 14.4 Volts for approximately 15 minutes every 21 hours. * Exclusive! Equalize Mode – Helps prevents battery stratification and power-robbing sulfation. The digital display will read STORAGE when in this mode. STORAGE MODE – Activated automatically when the 12 Volt systems are turned off and the battery has been fully charged for a period of 30 hours. The digital display will read NORMAL in this mode. This lower voltage safely completes the charge and remains in this mode as long as the 12 Volt systems in the boat are being operated. NORMAL MODE – Automatically selected once the battery reaches the 90% charged level. The digital display will read BOOST when the charger is in this mode. Boost Mode provides a higher charging voltage to rapidly bring the battery up to 90% of full charge. Battery voltage is constantly monitored by the microprocessor, which automatically selects one of four operating modes:īOOST MODE – Selected whenever the battery voltage is very low. The Inteli-Power Four-Stage Charging System – Provides optimum charging voltage at all times during the recharge cycle. Microprocessor-controlled four stage charging system provides rapid recharge and long battery life. Series or Parallel Connection – Inteli-Power Converter/Chargers can be connected in series to provide a combination 12/24 Volt system or in parallel to provide more current.Automatic thermal protection – reduces converter output to safe levels when unit temperature exceeds pre-set limits and protects converter from damage due to excessive heat.Programmable in the Field – PD2100 Series Inteli-Power Converter/Chargers are programmable in the field to provide optimum charging profiles for.This feature reduces thermal stress caused by fans that cycle on and off. Variable Speed Intelligent Cooling Fan – Only runs as fast as required to maintain a more constant operating temperature inside the Converter/Charger.Electronic Current Limiting – Limits the output current to the maximum rating of the charger to prevent over heating and damage caused by shorts or. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |